Skip to main content
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, front passenger side
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, front drivers side
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, driver side
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, inside cab
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, power window controls
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, inside cab, dashboard
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, front passenger side
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, front drivers side
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, driver side
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, inside cab
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, power window controls
Versalift VST-47-MHI, 2021 Dodge 5500 4x4, inside cab, dashboard

Versalift VST-47-MHI, 2021 Dodge 5500 4x4

Bucket Trucks
Unit number
4684N
Model
VST-47-MHI
Price
Call for price
Lift capacity
400 lbs
Reach
52 ft
Engine manufacturer
Cummins
Truck year
2021
Sales channel
Sale & Rental

VERSALIFT VST-47-MHI equipped as follows:

  • 52 ft. 4 in. working height
  • 30 ft. 9 in. horizontal side reach
  • Platform capacity of 400 lbs
  • Side mounted closed one-step 24 in. X 30 in. X 42 in. fiberglass platform
  • Platform liner and vinyl cover
  • TruGuard™ dielectric isolating system with right hand single-stick control. All control handles are isolated and tested per ANSI 92.2. The high resistive dielectric system is protected from direct environmental and job-related contamination. TruGuard™ technology incorporates the use of full hydraulic controls with durable metal handles and linkages
  • 180 degree Hydraulic platform rotator
  • Hydraulic dual arm articulating jib pole and winch package for up to 1,000 lbs. capacity, including insulated jib pole
  • 360o continuous rotation
  • Six GPM open center hydraulic system with a 3000 psi operating pressure
  • Side mounted telescopic upper boom allows low stowing of platform. Fiberglass inner boom and patented ELECTROGARD provide insulation gap of 41 inches fully retracted meeting ANSI A92.2 requirements for Category C 46KV and below
  • Chassis insulating system (fiberglass lower boom insert) providing 12 in. insulation gap and including accommodations to bridge insulation gap for testing per ANSI 92.2
  • ELECTROGARD and inner boom finished with white urethane paint over a white gel coat
  • Non-lube bearings used throughout
  • One set of hydraulic tool outlets with pressure limit valve. Valve can be adjusted from 1000 to 2500 psi
  • Sub frame mounted main A-frame outriggers with pivot feet, two control valves, and a selector valve
  • A-frame outriggers with pivot feet
  • Outrigger boom interlock system for main and auxiliary outriggers
  • Integral reservoir with a 17-gallon (64.4 l) capacity and dual sight gauges
  • Individual full pressure controls at the turret actuate all boom functions and is equipped with a selector valve to override upper controls
  • 12 volt DC backup pump providing power to all boom functions
  • Automatic throttle control for Dodge chassis
  • Auto boom latch for mounting on inner boom. The rotary auto boom latch works off the lift hydraulic pressure to open and close
  • Standard white urethane paint
  • Safety harness and lanyard

 

Steel line body equipped as follows:

  • 30 inch tread plate platform extension
  • LED lighting package installed in tail shelf
  • Access step at rear and side access
  • (2) chrome grab handles at side access
  • (2) pool type grab handles for rear tail shelf
  • Wheel chock storage with pendulum retainers and outrigger pad holders
  • Master door locking system, excludes 1st vertical curbside
  • 48” High Street side compartments as follows
        • 1st Vertical: (2) adjustable shelves with dividers and cutout for outrigger
        • 2nd Vertical: (2) adjustable shelves with dividers
        • Horizontal: Adjustable dividers installed in compartment bottom
        • Rear Vertical: (2) adjustable shelves with dividers
        • Hot stick shelf with rear access door
  • 40” High Curbside compartments as follows
        • 1st Vertical: (2) adjustable shelves with dividers and cutout for outrigger
        • 2nd Vertical: Gripstrut access steps to bed area with removable composite side gate
        • Horizontal: (1) adjustable shelf with dividers
        • Rear Vertical: (5) fixed material hooks 1-3-1

 

                        Installation includes the following:

  • Combo pintle hitch, D rings
  • 7 prong trailer connector
  • (2) amber strobe lights in tail shelf
  • (2) strobe lights in front grill
  • Grounding kit
  • Park brake interlock system
  • Back up alarm
  • Mud flaps
  • Outrigger pads
  • Wheel chocks
  • Fire extinguisher
  • 3-piece triangle reflector kit
  • Test and certify per ANSI A92.2

 

MOUNTED ON:

2021 Dodge 5500 4x4 equipped as follows:

  • GVWR: 19,500 lbs payload
  • 6.7L I6 Cummins Turbo diesel engine
  • 6-speed Aisin S69RC HD automatic transmission
  • Heavy duty front suspension group
  • Tradesman Level 1 equipment group
  • Electrical accessory group
  • Air conditioning
  • Cold weather group
  • Engine block heater
  • 225/70Rx19.5G all traction tires
  • Uconnect 3 with 5” display
  • HD vinyl 40/20/40 slit bench seat
  • Parkview rear back up camera
  • Transfer case skid plate shield
  • Painted Bright White clearcoat

STOCK PHOTOS

Get the Runnion Advantage

Learn the Top 10 reasons to get the Runnion Advantage.

View Flyer

Have a Question?

Use the link below to send us a question and one of our service representatives will respond as soon as possible.  If it's not in stock, we can locate it quickly!