Dur-A-Lift DPM2-47DU, 2024 Ford F600 4x4

Dur-A-Lift Model DPM2-47DU equipped as follows:

• CAT C Insulated aerial device
• 52’ working height, 54’ working height with basket elevator
• 49’ height to bottom of basket
• Main boom fiberglass insert
• Chassis isolator insert
• 31.5’ side reach
• 24” x 42” x 42” fiberglass basket with step and cover, and liner
• 550# basket capacity when not using winch
• 400# basket capacity when using jib
• Hydraulically extendable jib. Jib is top-mounted with a maximum capacity of 1000#
• Hydraulic leveling, stow, and dump
• 180-degree basket rotator
• Body harness & lanyard
• Continuous rotation
• Transmission mounted P.T.O and pump
• 12 volt emergency backup system
• Upper & lower operation controls with emergency shut down and start/stop controls
• 4-axis HERC joystick control
• Tool circuit at bucket
• A-frame outriggers with outrigger interlock, mid mount and rear mount
• Four 18” x 18” composite outrigger pads with two outrigger pad holders
• Two (2) LED dome strobe lights
• Timbren load boosters on front and rear axle
• 36” x 94” aluminum tailshelf and through box
• Chrome grab handle
• 2” Pintle/Ball and 7 pin trailer receptacle
• Backup alarm
• Fire extinguisher
• Reflector kit

Knapheide steel service body equipped as follows:

• 94” wide
• Compartments (both sides)
  • Compartments depth 20”
  • 1V - 34 ¼” L x 40” H
  • 2V – 21” L x 40” H
  • H – 52 ¾” L x 18 ½” H
  • 3V – 23 ¼” L x 40” H

MOUNTED ON:

2024 Ford F600 4x4 equipped as follows:

• 22,000 GVWR
• 6.7L 4V OHV Power Stroke V8 Turbo-Diesel B20 – 330 HP @ 2200 RPM,
  950 lb/ft torque @ 1800 RPM
• TorqShift 10-speed automatic transmission
• Engine block heater
• Front and rear 19.5” painted steel wheels
• Tires – 245/70Rx19.5
• Front axle 7,500 lb
• Rear axles 15,500 lb
• 169” wheelbase
• 4-wheel ABS brakes
• Air conditioning
• Chrome bumper and black grille with chrome accents
• 40-gallon fuel tank
• AM/FM stereo with LCD display and USB port
• 40/20/40 split bench seat- vinyl

• Color white