Skip to main content
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail

Versalift VN-555-MHI mounted on a 2022 International HV507 4x4

Bucket Trucks
Unit number
4781R
Model
VST-47-MHI
Price
Call for price
Lift capacity
400 lbs
Reach
52 ft
Engine manufacturer
Ford
Engine model
6.7L
Truck year
2022
Sales channel
Sale & Rental

VERSALIFT VST-47-MHI equipped as follows:             

  • 52 ft. 4 in. working height
  • 30 ft. 9 in. horizontal side reach
  • Platform capacity of 400 lbs
  • Side mounted closed one-step 24 in. X 30 in. X 42 in. fiberglass platform
  • Platform liner and vinyl cover.
  • TruGuard™ dielectric isolating system with right hand single-stick control.
    All control handles are isolated and tested per ANSI 92.2. The high resistive
    dielectric system is protected from direct environmental and job related
    contamination.  TruGuard™ technology incorporates the use of full hydraulic
    controls with durable metal handles and linkages.
  • 180 degree Hydraulic platform rotator.
  • Hydraulic dual arm articulating jib pole and winch package for up to 1,000 lbs.
    capacity, including insulated jib pole
  • 360o continuous rotation
  • Six GPM open center hydraulic system with a 3000 psi operating pressure
  • Side mounted telescopic upper boom allows low stowing of platform. 
    Fiberglass inner boom and patented ELECTROGARD provide insulation
    gap of 41 inches fully retracted meeting ANSI A92.2 requirements for
    Category C 46KV and below.
  • Chassis insulating system (fiberglass lower boom insert) providing 12 in.
    insulation gap and including accommodations to bridge insulation gap for
    testing per ANSI 92.2
  • ELECTROGARD and inner boom finished with white urethane paint
    over a white gel coat.
  • Non-lube bearings used throughout.
  • One set of hydraulic tool outlets with pressure limit valve. Valve can be
    adjusted from 1000 to 2500 psi.
  • Sub frame mounted main A-frame outriggers with pivot feet, two control
    valves, and a selector valve.
  • A Frame outriggers with pivot feet
  • Outrigger boom interlock system for main and auxiliary outriggers
  • Integral reservoir with a 17-gallon (64.4 l) capacity and dual sight gauges.
  • Individual full pressure controls at the turret actuate all boom functions
    and is equipped with a selector valve  to override upper controls
  • 12 volt DC backup pump providing power to all boom functions
  • Automatic throttle control for Dodge chassis
  • Auto boom latch for mounting on inner boom. The rotary auto boom latch
    works off the lift hydraulic pressure to open and close.
  • Standard white urethane paint
  • Safety harness and lanyard

 

BFX Bodies 132” long x 42” high x 94” wide service body equipped as follows:

  • 30 inch aluminum tread plate platform extension
  • BFX LED lighting package installed in tail shelf.
  • Cable access step at rear and side access.
  • Two (2) stainless steel grab handles at side access and two (2)
    aluminum grab rails at rear tail shelf.
  • Wheel chock storage and outrigger pad holders.
  • Push/pull rod lock system
  • 42” High Street side compartments as follows
        • 1st Vertical: (2) adjustable shelves with dividers and cutout
          for outrigger
        • 2nd Vertical: (2) adjustable shelves with dividers
        • Horizontal: (1) removable shelf with dividers
        • Rear Vertical:  (2) adjustable shelves with dividers
        • 132” x 18” x 11” fiberglass hotstick top box with door at rear.
  • 42” High Curbside compartments as follows
        • 1st Vertical: (2) adjustable shelves with dividers and cutout
          for outrigger
        • 2nd Vertical: Grip strut access steps to bed area with removable
          plastic tail board.
        • Horizontal: (1) adjustable shelf with dividers
        • Rear Vertical:  (5) fixed material hooks 1-3-1
  • Combo pintle hitch, D rings 
  • 7 prong trailer connector.
  • (2) amber strobe lights in tail shelf
  • (2) strobe lights in front grill.
  • Grounding kit,
  • Park brake interlock system
  • Back up alarm
  • Outrigger pads
  • Wheel chocks
  • Fire extinguisher
  • 3-piece triangle reflector kit.
  • Test and certify per ANSI A92.2

 

2022 Ford F550 4x4 equipped as follows:

  • GVWR: 19,500 lbs payload plus upgrade package.
  • 6.7L 4V OHV Power Stroke V8 turbo diesel engine
  • TorqShift 10-speed automatic transmission
  • Snow plow prep package including dual alternators (Total 332-Amps)
  • 4.88 limited slip axle.
  • Air conditioning.
  • Engine block heater
  • 225/70Rx19.5G BSW traction tires.
  • Radio: AM/FM stereo includes 4 speakers.
  • 4.2” center-stack screen and SYNC communications system
  • HD vinyl 40/20/40 slit bench seat
  • Trailer brake controller
  • Operator Commanded Regeneration (OCR)
  • Power windows, power door locks and remote keyless entry
  • Steering wheel mounted cruise control
  • Rear view camera and prep kit
  • Painted Oxford White.
Get the Runnion Advantage

Learn the Top 10 reasons to get the Runnion Advantage.

View Flyer

Have a Question?

Use the link below to send us a question and one of our service representatives will respond as soon as possible.  If it's not in stock, we can locate it quickly!