National Crane 8100D, 2019 Peterbilt 348

National Crane Model 8100D

• 23 ton capacity
• 29-6” to 100’ four (4) section proportional boom – 110’ sheave height
• Single front outrigger for 360 degree stability
• 22’ wood deck with 30” steel bulkhead
• Internal anti-two block wiring
• Rated Capacity Limiter System (RCL) computer capacity alert system
• RCL displays boom angle and length, working radius, rated load and total weight being lifted - Hi-performance planetary winch with 9/16” spin resistant wire rope
• 7 ton round down-haul style weight with top swivel and hook
• Burst-O-Speed winch with 147 FPM and 206 FPM line speed
• 375 non-continuous rotation, adjustable swing drive
• 36” x 24” x 24” aluminum tool box

2019 Peterbilt 348

• 60,000# GVW
• Paccar PX-9 engine, 350 hp @ 2000 rpm, 1150 lb/ft @ 1400
• Eaton RTO14908LL 10-speed transmission
• Front Axle – 20,000# with Taper Leaf springs
• Rear Axle – 40,000# with Haulmaax HMX400 air suspension
• Front tires 315/80R22.5
• Front wheels – 22.5x12.25 Alcoa aluminum with clean buff finish
• Rear tires – 11R22.5
• Rear wheels – 22.5x8.25 Alcoa aluminum with clean buff finish
• Differential locks on both axles
• Block heater
• Polished aluminum air tanks for tanks on outside of frames
• Bendix air dryer with heater
• Trailer hand valve
• 7-way socket connected to end of frame
• 90 gallon aluminum fuel tank
• Driver’s seat – air ride, high back fabric with right armrest
• Passenger’s seat – fixed, low back fabric
• Adjustable steering column – tilt/telescope
• Power windows and doors
• ConcertClass Stereo – AM/FM, WB, USB, MP3, Bluetooth phone
• 9,070 miles, 718 hours as of 07/2019
• Photos taken 04/2019